Yesterday, I shared three concepts that I had for creating an extra-long countertop to span my 19.5-foot wall within the studio, and y’all had some tremendous artistic concepts for me! My thoughts has been reeling with the entire completely different concepts, and ultimately, I’ve determined to make use of hardwood flooring to create the countertop.
There have been just a few causes that I made a decision to go along with this selection. First, I’ve executed it earlier than, so I do know it should work. I used 3/4-inch purple oak hardwood flooring to make the countertop in our walk-in pantry.
So there can be no guesswork or trial and error with this. I’ve already executed it, and it turned out nice, and I’ve my previous weblog posts to refer again to in order that I can refresh my reminiscence on the method. You possibly can see how I made these counter tops right here.
The second motive I made a decision to go along with hardwood flooring as a countertop is as a result of the result’s a sturdy strong wooden floor at a fraction of the price of butcherblock. I’ll in all probability go along with unfinished maple for the studio counter tops, and that runs about $6.30/sq. foot. That’s about $283.50 for the lengthy 19.5-foot countertop, after which I’ll want to purchase plywood for the substrate. However even with that, I’m nonetheless lower than $500 for a 19.5-foot wooden countertop.
The third motive is apparent — no straight seams or joints. This was my important concern with utilizing butcherblock or sheet laminate. Whether or not I’ve one seam or joint within the center, or two offset seams or joints, they might hassle me both method. I simply wished one thing to seem as a strong, uninterrupted floor.
And the ultimate motive is that it may be in-built place. There are a number of countertop choices that require being constructed elsewhere after which being put into place. And instance can be the butcherblock-style countertop that I made for our hallway lavatory.
That countertop is manufactured from strong pine 2 x 3’s glued and screwed to one another, after which minimize all the way down to measurement. I needed to construct it the other way up (utilizing my entrance porch as a piece bench), after which as soon as it was assembled, I turned it over, minimize it to measurement, after which introduced it inside and set it in place.
Now think about doing that with a 20-foot-long countertop. ? Yeah, that will be not possible.
So DIYing my very own butcherblock countertop utilizing this technique was by no means an choice for the studio. I wanted one thing that might be in-built place, and by no means wanted to be picked up and carried and set in place.
The profitable thought, and the one I felt essentially the most assured and peaceable about, is constructing a countertop utilizing hardwood flooring over a plywood substrate. And now that I’ve selected it, I’m really fairly enthusiastic about it. I simply must resolve on the particular wooden species that I wish to use. I do know for certain that I don’t wish to use purple oak. I’ve had my fill of purple oak since that’s what our hardwood flooring is all through the home, and that’s what I used on the pantry countertop. So as to get that countertop the colour it’s, I needed to bleach the wooden to take away the purple/pink undertones. I’d like to have the ability to skip that step by deciding on a wooden that doesn’t have that purple/pink undertone. I feel I’ve narrowed it all the way down to white oak and maple.
In different information, I’m lastly going to begin portray the checkerboard design on the ground right now. I’ve acquired every little thing prepped, taped, and able to go. So by Monday, I ought to even have this portion of the ground completed and able to present you!
I’m so excited to see precise progress on this room! It’s been a very long time coming, and it’s so enjoyable to lastly see my imaginative and prescient come to life.
