We needed large-scale vacation artwork for our household room. So we made this DIY Christmas artwork that lights up! It is so magical at evening.
Hey associates! When you comply with me on Instagram, you have most likely already seen a preview of this undertaking. And you could have even adopted alongside on my Instagram tales as I constructed it. And now I’ve lastly gotten round to writing up this full tutorial for you. This artwork undertaking is superior as a result of you can also make it in any dimension, form, shade, and so on. You customise it to precisely what you want! We wanted ours to be BIG in order that it might sit on this DIY artwork ledge that we made a number of years in the past. And it turned out even higher than I imagined. Learn on to discover ways to make your very personal.
Thanks to DAP Merchandise for sponsoring this put up. This put up incorporates affiliate hyperlinks in your comfort. Click on HERE for my full disclosure coverage.
DIY Christmas Artwork Tutorial
I encourage you to look at the brief video beneath for a extremely good overview of this undertaking first. Then learn the step-by-step written directions beneath.
Supplies Wanted:
Steps:
1) Reduce your plywood to the dimensions you need your artwork to be. We used a scrap piece of plywood that was 52″ x 48″ so we did not even have to chop it!
2) Paint your plywood no matter shade you select. I used this beautiful inexperienced shade.
3) As soon as your paint dries, sketch out no matter design you need. I used chalk to evenly draw out “Rejoice” till I used to be pleased with it. Chalk is nice as a result of you’ll be able to simply wipe off any errors if it is advisable to!
4) As soon as you’re pleased with what you have got sketched out, use an artist’s brush to color over your chalk traces. I used a white pattern paint that we had laying round. Because it wasn’t nice high quality paint (pattern paint by no means actually is), I needed to paint over the “Rejoice” 3 times. But it surely was fast and straightforward! The picture beneath is the way it taken care of 1 coat of the white paint.
5) As soon as your entire portray is completed and dry, you’ll be able to body out the sting of your DIY Christmas artwork with the wooden lattice strips. Reduce them to size. We determined to maintain the pure pine, however you can paint or stain them for those who favor. We use a easy butt joint to maintain it simple! You need to connect the strips in order that they sit flush with the entrance of your plywood. This implies the strips will overhang the again of the plywood, which can cover the battery packs for the lights when you connect them 🙂 We hooked up our strips with a brad nailer, but when you do not have one, you need to use the tactic I share on this put up.
6) Use DAP Plastic Wooden X to patch any nail holes. Sand clean as soon as dry.
7) Now it is time to connect your lights! Begin by drilling 1 small gap close to the sting wherever your design begins or ends. Thread the dewdrop gentle strand by way of the outlet in order that the battery pack stays hidden on the bottom of your plywood. Connect it with a sizzling glue gun or tape.
8) Run your dewdrop lights alongside the middle of your design. Add a drop of DAP RapidFuse Extremely Clear beneath every gentle and press the sunshine into place. It is vital to make use of this glue in order that it dries completely clear! Nobody desires to see dabs of sizzling glue or common glue throughout their artwork! Then tape the wire on all sides of the sunshine to carry it in place whereas the glue cures. Repeat again and again till you’re performed. We needed to drill 2 extra small holes to string further gentle strands by way of as a result of our artwork is so giant. So we’ve a complete of three battery packs glue to the again of our artwork. Happily, the lights we used have a timer in order that they run for six hours robotically on daily basis.
Straightforward peasy!
We’re so, so pleased with how this DIY Christmas artwork turned out! We will not wait to make use of it for a lot of, a few years to come back! That is the way it seems to be at evening.
And this is the way it seems to be through the day when the lights aren’t on. I completely find it irresistible each methods!
What do you assume?! You may try extra of my Christmas posts HERE. And you will discover the tutorial for our tremendous lengthy DIY artwork ledge right here.
Now earlier than you head out, signal as much as be a VIP so you’ll be able to seize all of our freebies, together with our printable Christmas artwork.
